Tools Required
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
J 45004 Fuel Tank Siphon Hose
IMPORTANT:
Purge any residual fuel in J 45004
into an approved container prior to use.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) or Battery Negative Cable Disconnection and Connection (Dual Batteries) or Battery Negative Cable Disconnection and Connection (Auxiliary Battery) .
- Remove the fuel fill cap.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Loosen the fuel fill pipe clamp (2).
- Remove the fuel fill pipe from the fuel tank.
- Insert the J 45004 hose into the tank.
- Attach the J 45004 hose to the hose used with the hand or air operated pump devise.
- Using a hand or air operated pump drain as much fuel from the tank as possible.