LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Engine Control System & Fuel System - 6.6L (LMM) - Repair Instructions) >> Repair Instructions >> Charge Air Cooler Outlet Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Charge Air Cooler Outlet Pipe & Quick Connect Fitting Clip
    GM1873426Courtesy of GENERAL MOTORS CORP.
  1. Install NEW quick connect fitting clips to both ends of the charge air cooler outlet pipe.
  2. Fig 2: View Of Charge Air Cooler Outlet Pipe & Quick Connect Fitting Clip
    GM1873427Courtesy of GENERAL MOTORS CORP.
  3. Working through the wheelhouse, install the charge air cooler outlet pipe onto the charge air cooler.
  4. Install the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement - Right Side (Chevrolet) or Front Wheelhouse Liner Replacement - Right Side (GMC) .
  5. Fig 3: View Of Charge Air Cooler Outlet Pipe At Intake Air Valve
    GM1873428Courtesy of GENERAL MOTORS CORP.
  6. Install the charge air cooler outlet pipe onto the intake air valve.
  7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .