Installation Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The air cleaner outlet duct must be fully seated against the positive stop feature on the turbocharger inlet and also must be fully seated against the positive stop features on both sides of the air cleaner assembly.
- Install the air cleaner outlet duct.
- Tighten the outlet duct clamps at the turbocharger and the air cleaner assembly.
Tighten: Tighten the clamps to 4 N.m (35 lb in).
CAUTION:
Refer to Fastener Caution
.