LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1558 (Fixed And MOVEABLE Windows System) >> Repair Instructions >> Rear Window Weatherstrip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Sliding Window Weatherstrip & Frame
    GM1853008Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If the window was broken remove all traces of broken glass from the seats, floor and ducts.
  1. Remove the rear sliding center window. Refer to Rear Sliding Window Replacement .
  2. Remove the rear sliding window weatherstrip (1) from the frame (2).
  3. Clean around the edges the frame with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint free cloth. Remove all traces of the old weatherstrip.
scientia non olet · About LEMON Manuals