LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Repair Instructions >> Generator Bracket Replacement (V8) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Wiring Harness, Clip, Bolt & Connector
    GM1696914Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement (V6)  or Generator Replacement (V8)  or Generator Replacement (6.6L) .
  2. Remove the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Power Steering Pump Replacement (4.3L) or Power Steering Pump Replacement (6.6L) .
  3. Remove the engine wiring harness clip bolt (3) are reposition the clip (1) away from the generator bracket.
    4. Fig 2: View Of Generator Bracket & Bolts (4.8L, 5.3L & 6.0L)
    GM847280Courtesy of GENERAL MOTORS CORP.
  4. Remove the generator bracket bolts.
  5. Remove the generator bracket.
scientia non olet · About LEMON Manuals