LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Repair Instructions >> Engine Ground Strap Replacement (V6) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ground Strap Nut At Front Of Dash Stud
    GM663474Courtesy of GENERAL MOTORS CORP.
  1. Install the ground strap to the stud.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the ground strap nut to the stud at the front of dash and tighten to 9 N.m (80 lb in).
  4. Fig 2: View Of Ground Strap Bolt
    GM1877409Courtesy of GENERAL MOTORS CORP.
  5. Position the ground strap to the rear of the left cylinder head.
  6. Install the ground strap bolt and tighten to 16 N.m (12 lb ft).