LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Repair Instructions >> Engine Ground Strap Replacement (LMM) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Ground Strap & Bolt
    GM1873892Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine ground strap bolt (2) from the rear of the cylinder head.
  2. Reposition the engine ground strap (1) from the cylinder head.
  3. Fig 2: View Of Ground Strap & Nut
    GM1873891Courtesy of GENERAL MOTORS CORP.
  4. Remove the ground strap nut (1) from the stud on the plenum front panel.
  5. Remove the ground strap (2) from the stud and the vehicle.