LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Repair Instructions >> Engine Ground Strap Replacement (LMM) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ground Strap & Nut
    GM1873891Courtesy of GENERAL MOTORS CORP.
  1. Install the ground strap (2) to the vehicle and the stud on the plenum front panel.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the ground strap nut (1) to the stud on the plenum front pane and tighten to 9 N.m (80 lb in).
    3. Fig 2: View Of Engine Ground Strap & Bolt
    GM1873892Courtesy of GENERAL MOTORS CORP.
  3. Position the ground strap (1) to the cylinder head.
  4. Install the ground strap bolt (2) to the cylinder head and tighten to 16 N.m (12 lb ft).
scientia non olet · About LEMON Manuals