LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Tray, Brackets & Nuts
    GM1702822Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 3 nuts securing the battery tray to the battery tray bracket and tighten to 20 N.m (15 lb ft).
  3. Install the nut securing the battery tray to the front fender inner panel and tighten to 9 N.m (80 lb in).
    4. Fig 2: View Of Battery Tray Front Support & Bolts
    GM1702819Courtesy of GENERAL MOTORS CORP.
  4. Install the battery tray front support.
  5. Install the battery tray front support bolts and tighten to 20 N.m (15 lb ft).
  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals