Disconnect Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Battery Disconnect Warning
.
- Turn off all the lamps and accessories.
- Turn the ignition OFF.
- Open the hood.
- Loosen the primary battery negative cable clamp nut (1).
- Remove and reposition the primary battery negative cable, away from the battery.
- Loosen the auxiliary battery negative clamp nut (1).
- Remove the auxiliary battery negative cable (2) from the auxiliary battery negative post.
- Reposition the auxiliary negative battery cable away from the battery.