LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Repair Instructions >> Auxiliary Battery Relay Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Auxiliary Battery Relay & Nuts
    GM1857383Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the auxiliary battery relay and nuts and tighten to 9 N.m (80 lb in).
    2. Fig 2: View Of Battery Cable Nuts, Retainers & Bolts
    GM1857177Courtesy of GENERAL MOTORS CORP.
  2. Install the auxiliary battery positive cable to the auxiliary battery relay.
  3. Install the auxiliary battery positive cable nut (4) to the battery relay stud and tighten to 9 N.m (80 lb in).
  4. Position the auxiliary battery positive cable boot (5) to the auxiliary battery relay stud.
  5. Connect the auxiliary battery positive cable electrical connector (1) to the battery relay.
    6. Fig 3: View Of Battery & Battery Cable Fasteners
    GM1857067Courtesy of GENERAL MOTORS CORP.
  6. Install the auxiliary battery positive cable to the auxiliary battery relay.
  7. Install the auxiliary battery positive cable nut (6) to the battery relay stud and tighten to 9 N.m (80 lb in).
  8. Position the auxiliary battery positive cable boot (5) to the auxiliary battery relay stud.
  9. Connect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery)  or Battery Negative Cable Disconnection and Connection (Dual Batteries)  or Battery Negative Cable Disconnection and Connection (Auxiliary Battery) .
scientia non olet · About LEMON Manuals