LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1555 (Battery, Charging System And Starting System - Non-Hybrid) >> Diagnostic Information and Procedures >> Starter Noise Diagnosis >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flywheel inspection cover.
  2. Inspect the flywheel for the following:
    • Loose flywheel bolts
    • Chipped gear teeth
    • Missing gear teeth
    • Bent flywheel
    • Debris in the bell housing
    • If not within specifications, remove the debris, tighten the flywheel bolts, or repair or replace the flywheel.
  3. If all inspections were within specification, replace the starter motor.
scientia non olet · About LEMON Manuals