Circuit/System Verification
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Reprogram the HVAC control module that set DTC B1023. The module should successfully reprogram.
- If the module will not reprogram, replace the HVAC control module that set the DTC.
- With a scan tool, clear the DTC.
- Ignition OFF.
- Wait 60 seconds, then recheck for DTCs. DTC B1023 should not set.
- If DTC B1023 sets, replace the module.