Remote Start Activation
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The following describes the HVAC control head functionality upon receiving the remote start active serial data message and a power mode status is set to off/awake. During remote start on the manual HVAC system the blower motor, mode doors, temperature doors, recirc door and A/C request will be set to the current setting on the control panel when the vehicle was last turned off. The rear defrost will be activated and the heated seats will be disabled.