LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1552 (Steering Wheel And Steering Column) >> Repair Instructions >> Shift Lever Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column shroud. Refer to Steering Column Shroud Replacement .
  2. Roll back the shift lever seal on the shift lever until the shift lever bolt is exposed.
  3. Disconnect any electrical connectors as needed.
    4. Fig 1: Locating Shift Lever & Screw
    GM1700835Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift lever bolt (2).
  5. Remove the shift lever (1).
scientia non olet · About LEMON Manuals