LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1552 (Steering Wheel And Steering Column) >> Repair Instructions >> Repairing Scratched Wood Steering Wheels >> Repair Procedure

Repair Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
  2. Wash the wood section of the wheel with wax and grease remover.
  3. Mask off the non-wood area of the steering wheel.
    4. IMPORTANT: Do NOT sand through the clear.
  4. Sand with 400 grit sand paper first. Finish sanding with 600 grit.
  5. Wash the wood section of the wheel again with wax and grease remover.
  6. Clear coat the steering wheel using the appropriate information in the body repair section.
  7. Install the steering wheel. Refer to Steering Wheel Replacement .
scientia non olet · About LEMON Manuals