LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1551 (Instrument Panel System Displays & Gauges) >> Diagnostic Information and Procedures >> Fuel Gauge Inaccurate or Inoperative (Dual Tank) >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, remove the primary and secondary fuel level senders.
  2. While sweeping the primary fuel level sensor through its full range of motion, test for a minimum value less than 41 Ω and a maximum value greater than 119 Ω between the signal terminal C and the low reference terminal B.
    • If not within the specified range, replace the primary fuel level sensor.
  3. While sweeping the secondary fuel level sensor through its full range of motion, test for a minimum value less than 41 Ω and a maximum value greater than 119 Ω between the signal terminal C and the low reference terminal B.
    • If not within the specified range, replace the secondary fuel level sensor.
scientia non olet · About LEMON Manuals