Floor Air Outlet Duct Replacement - Right Side

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Floor Air Outlet Duct - Right Side

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the I/P insulator. Refer to Instrument Panel Insulator Replacement (With RPO SLT) or Instrument Panel Insulator Replacement (Without RPO SLT) . Remove the front floor console side trim panel - right. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (with RPO SLT) .
1	Air Duct Bolt CAUTION: Refer to Fastener Caution . Tighten: 1.5 N.m (13 lb in)
2	Air Outlet Duct - Floor RH Tip: Slide Duct to the right and remove.

Callout

Component Name

Preliminary Procedure

Remove the I/P insulator. Refer to Instrument Panel Insulator Replacement (With RPO SLT) or Instrument Panel Insulator Replacement (Without RPO SLT) .
Remove the front floor console side trim panel - right. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (with RPO SLT) .

Air Duct Bolt

CAUTION: Refer to Fastener Caution .

Tighten: 1.5 N.m (13 lb in)

Air Outlet Duct - Floor RH
Tip: Slide Duct to the right and remove.