Expansion (Orifice) Tube Replacement
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
Preliminary Procedure
|
|
| 1 | Orifice Tube Fitting
CAUTION:
Refer to Fastener Caution
. Tip: Loosen orifice tub fitting and separate the pressure line to access the orifice. Tighten: 9 N.m (80 lb in) |
| 2 | O-ring Seal Tip: Remove and discard O-ring. Refer to Air Conditioning O-Ring Seal Replacement . |
| 3 | Orifice Tube Assembly Tip: Use J 26549-E to remove orifice tube. See Special Tools . |