LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1550 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Defroster Door Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of HVAC Module Assembly
    GM962571Courtesy of GENERAL MOTORS CORP.
  1. Install the defroster door (8).
  2. Install the mode actuator cam assembly.
  3. Install the mode actuator.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the mode actuator screws and tighten to 1.6 N.m (14 lb in).
  5. Install the HVAC module assembly halves.
    6. NOTE: For every heat stake removed ensure that you install a screw.
  6. Install the screws to the HVAC module assembly and tighten to 1.6 N.m (14 lb in).
  7. Install the HVAC module. Refer to Air Conditioning and Heater Module Assembly Removal and Installation .
scientia non olet · About LEMON Manuals