Removal Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Open the power sunroof window to the fully rear position.
- Remove the actuators screws (1) and actuators (2) from each side of the sunroof module.
- Remove the screws (1) attaching the sunroof air deflector (2) to the sunroof module (3).
- Slide the air deflector rearward until it releases from the sunroof module.
- Remove the sunroof air deflector (2) from the sunroof module (3).