Instrument Panel Compartment Door Opening Frame Replacement (without RPO SLT)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Compartment Door Opening Frame (Without RPO SLT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel compartment door. Refer to Instrument Panel Compartment Door Replacement (With RPO SLT) . Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (with RPO SLT) or Instrument Panel Outer Trim Cover Replacement (without RPO SLT) .
1	Instrument Panel Compartment Opening Frame Screw (Qty: 5) CAUTION: Refer to Fastener Caution . Tighten: 2.5 N.m (22 lb in)
2	Instrument Panel Compartment Opening Frame Assembly Procedure Disconnect the electrical connections. When replacing the instrument panel compartment opening frame assembly, transfer all necessary components.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel compartment door. Refer to Instrument Panel Compartment Door Replacement (With RPO SLT) .
Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (with RPO SLT) or Instrument Panel Outer Trim Cover Replacement (without RPO SLT) .

Instrument Panel Compartment Opening Frame Screw (Qty: 5)

CAUTION: Refer to Fastener Caution .

Tighten: 2.5 N.m (22 lb in)

Instrument Panel Compartment Opening Frame Assembly

Procedure

Disconnect the electrical connections.
When replacing the instrument panel compartment opening frame assembly, transfer all necessary components.