LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Engine Cooling System - Non-Hybrid) >> Repair Instructions >> Radiator Outlet Hose Replacement (Diesel) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator Outlet Hose & Outlet Heater Hose
    GM674543Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator outlet hose to the vehicle.
  2. Install the radiator outlet hose and clamp to the radiator. Ensure the hose is positioned properly in order to prevent interference with the fan shroud.
  3. Install the radiator outlet hose clip retainers to the brackets.
    4. Fig 2: Identifying Radiator Outlet Hose (Diesel)
    GM2042825Courtesy of GENERAL MOTORS CORP.
  4. Install the surge tank outlet hose (1) to the surge tank.
    5. Fig 3: View Of Radiator Outlet Hose At Engine
    GM674559Courtesy of GENERAL MOTORS CORP.
  5. Install the radiator outlet hose and clamp to the water pump.
  6. Install the heater outlet hose to the radiator outlet hose.
  7. Install the upper and lower fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (LMM Diesel)  .
  8. Fill the engine coolant. Refer to Cooling System Draining and Filling (Vac-N-Fill)  or Cooling System Draining and Filling (Static Fill) .
scientia non olet · About LEMON Manuals