LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Engine Cooling System - Non-Hybrid) >> Repair Instructions >> Engine Coolant Fan Motor Replacement (Non-HP2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cooling Fan Motor & Bolts
    GM1505517Courtesy of GENERAL MOTORS CORP.
  1. Install the cooling fan motor(s).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the cooling fan motor bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Install the cooling fan blades. Refer to Engine Coolant Fan Replacement (Non-HP2) .
scientia non olet · About LEMON Manuals