Hood Center Molding Replacement (HD)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hood Center Molding Replacement (HD)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: CAUTION: Refer to Exterior Trim Emblem Removal Caution . Use a flat-bladed plastic tool in order to release the hood center molding from the outer hood panel.
1	Hood Center Molding Retainer (Qty 10)
2	Hood Center Molding Procedure Transfer the hood center molding emblem to the new hood center molding. Ensure the foam gaskets are on all the retainers prior to installing the new hood center molding to the outer hood panel.

Callout

Component Name

Preliminary Procedure:

CAUTION: Refer to Exterior Trim Emblem Removal Caution .

Use a flat-bladed plastic tool in order to release the hood center molding from the outer hood panel.

Hood Center Molding Retainer (Qty 10)

Hood Center Molding

Procedure

Transfer the hood center molding emblem to the new hood center molding.
Ensure the foam gaskets are on all the retainers prior to installing the new hood center molding to the outer hood panel.