LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1523 (Vibration Symptoms Diagnosis And Correction) >> Diagnostic Information and Procedures >> Differential Pinion Input Shaft Runout Measurement >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

J-7872:  Magnetic Base Dial Indicator Set, or equivalent

NOTE: This measurement procedure is intended to measure drive axle pinion input shaft runout for systems with a constant velocity (CV) joint, rubber coupling or bolt-on U-joint yoke at the drive axle
scientia non olet · About LEMON Manuals