LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Engine Mechanical - 6.6L (4 Of 5)) >> Repair Instructions - Off Vehicle (3 Of 4) >> Crankshaft Front Oil Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pressing Crankshaft Front Oil Seal On Using J 44645
    GM663819Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the crankshaft sealing surface with engine oil.
  2. Place the crankshaft front oil seal onto the crankshaft.
  3. Install the J 44645  to the crankshaft. See Special Tools .
  4. Press the crankshaft front oil seal onto the crankshaft with the J 44645  until the tool bottoms out. See Special Tools .
  5. Remove the J 44645  . See Special Tools .
scientia non olet · About LEMON Manuals