LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1401 (Engine Mechanical - 6.6L (2 Of 5)) >> Repair Instructions - On Vehicle >> Valve Lifter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Valve Lifter, Guides, Retainers & Bolts
    GM660517Courtesy of GENERAL MOTORS CORP.
  1. Remove the cylinder head. Refer to Cylinder Head Replacement - Left Side  or Cylinder Head Replacement - Right Side .
  2. Loosen the valve lifter guide retainer bolts.
  3. Remove the valve lifter guide retainers.
  4. Remove the valve lifter guides.
  5. Remove the valve lifters.
  6. If required, clean and inspect the lifters. Refer to Valve Lifter Cleaning and Inspection .
scientia non olet · About LEMON Manuals