Shock Absorber Replacement (2500, 3500)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Rear Shock Absorber Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution
. Tip: Support the rear drive axle with a suitable jack stand. Tighten:
|
| 2 | Rear Shock Absorber Nut (Qty: 2) |
| 3 | Rear Shock Absorber |