LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1393 (Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L (1 Of 5)) >> Description and Operation >> Cylinder Deactivation (Active Fuel Management) System Description >> System Operation

System Operation

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

General Motors Active Fuel Management engine control system has the ability, under certain light load driving conditions, to provide maximum fuel economy by deactivating 4 of the engines 8 cylinders. The engine will normally operate on 8 cylinders in V8 mode during starting, idling, and medium or heavy throttle conditions. When commanded ON, the engine control module (ECM) will direct the active fuel management system and deactivate cylinders 1 and 7 on the left bank and cylinders 4 and 6 on the right bank, forcing V4 mode. Refer to Lubrication Description (RPO LY2)  or Lubrication Description (RPO LH6/LMG/LY5/LC9)  or Lubrication Description (RPO LY6/L9H)  or Lubrication Description (RPO L76)  and Cylinder Deactivation (Active Fuel Management) System Description .