Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install a NEW rocker arm cover gasket.
- Install NEW rocker arm cover bolt grommets, if necessary.
- Install the rocker arm cover.
- Install the rocker arm cover bolts.
Tighten: Tighten the bolts to 12 N.m (106 lb in).
- Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
NOTE:
Do not reuse the cover gasket or the valve rocker arm cover bolt grommets.
CAUTION:
Refer to Fastener Caution
.