LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1392 (Engine Mechanical - 4.3L) >> Repair Instructions - On Vehicle >> Drive Belt Tensioner Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt Tensioner Locating Pin
    GM869705Courtesy of GENERAL MOTORS CORP.
  1. Install the belt tensioner. Position the locating pin (1) on the tensioner into the hole in the generator bracket.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the belt tensioner bolt and tighten to 50 N.m (37 lb ft).
  3. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals