LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1392 (Engine Mechanical - 4.3L) >> Repair Instructions - Off Vehicle >> Water Pump Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Water Pump Pulley, Fan & Bolts
    GM317191Courtesy of GENERAL MOTORS CORP.
  1. Remove the bolts and the fan and water pump pulley using the J 41240  . See Special Tools .
  2. Fig 2: View Of Water Pump Inlet Hose & Clamps
    GM182853Courtesy of GENERAL MOTORS CORP.
  3. Remove the clamps and the water pump inlet hose.
  4. Fig 3: Identifying Water Pump
    GM188054Courtesy of GENERAL MOTORS CORP.
  5. Remove the water pump bolts.
  6. Remove the water pump.
  7. Remove the water pump gaskets.
  8. Discard the water pump gaskets.