Valve Lifter Installation

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Valve Lifters

Courtesy of GENERAL MOTORS CORP.

Apply lubricant GM P/N 12345501 (Canadian P/N 992704) or equivalent, to the valve lifter rollers.

NOTE: If reusing the valve lifters, install the valve lifters in the original positions.

Install the valve lifters.

Fig 2: View Of Valve Lifter Pushrod Guides

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the valve lifter pushrod guides and tighten to 16 N.m (12 lb ft).