LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1391 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Right Side (4.3L) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Right Side Exhaust Manifold Heat Shield & Bolts
    GM1878303Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Position the exhaust manifold heat shield to the exhaust manifold and install the heat shield bolts.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  2. Install the spark plug wires. Refer to Spark Plug Replacement .
scientia non olet · About LEMON Manuals