Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the heat shields (1, 3) through the respective wheelwell.
- Install the exhaust heat shield (1, 3) to the dash panel studs.
- Install the exhaust heat shield nuts and tighten to 9 N.m (80 lb in).
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution
.