LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1388 (Front Drive Axle) >> Repair Instructions >> Front Drive Axle Clutch Shaft Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inner axle shaft and housing assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle)  or Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles) .
  2. Remove the clutch shaft from the differential carrier assembly.
    3. Fig 1: Identifying Clutch Shaft Pilot Bearing - Front Drive Axle
    GM680254Courtesy of GENERAL MOTORS CORP.
  3. Remove the clutch shaft pilot bearing using the J 34011  . See Special Tools .
scientia non olet · About LEMON Manuals