Circuit/System Verification
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- If DTC P2632 is set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Turn ON the ignition, with the engine OFF.
- Command the fuel pump relay ON and OFF several times with a scan tool. You should either hear or feel the fuel pump relay click with each command. The fuel pump should operate when commanded ON.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.