LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1387 (Engine Controls And Fuel - 6.6L - DTC P2544 To DTC P2693) >> DTC P2632 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pump is located on the left frame rail between the fuel tanks. The engine control module (ECM) provides ignition positive voltage to the coil side of the fuel pump relay. The ECM energizes the fuel pump relay, which applies power to the fuel transfer pump. Fuel is transferred from the rear fuel tank to the front fuel tank in order to ensure all of the usable fuel volume is available to the engine.

The control module monitors the voltage on the fuel pump relay control circuit. If the control module detects an incorrect voltage on the fuel pump relay control circuit, a fuel pump relay control DTC sets.