Circuit/System Testing
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Check the axle switch signal circuit for a short to voltage.
- If everything checks normal then go to the next step.
- Check the front axle actuator control circuit for a short to ground with the front axle actuator disconnected and the mode selection switch disconnected.
- If everything checks normal reconnect the mode selection switch and retest. If the circuit shows a short to ground then replace the switch. If the circuit indicates no short to ground then refer to Front Axle Actuator and Axle Testing .