LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1379 (Automatic Transmission - ALLISON - DTC P0880 To DTC P2771) >> DTC P0964, P0966, or P0967 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, engine OFF, command the PC Solenoid 2 ON and OFF with a scan tool. Observe the operation of the PC Sol. 2 Pressure Command parameter. The PC Sol. 2 Pressure Command parameter should change from 1,600 kPa (232 psi) to 0 kPa (0 psi).
  2. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals