LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Engine Controls And Fuel - Hybrid (Hp2) 6.0L (LFA) - DTC P0231 To DTC P069E) >> DTC P0351-P0358 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, open the hood to disable the Auto-Stop function. Refer to Hybrid Modes of Operation Description .
  2. Ignition ON, verify the scan tool hood position parameter displays Open.
  3. Engine running, monitor the following ignition control (IC) circuit status parameters with a scan tool:
    • Cylinder 1-8 Ckt. Short Gnd Test Status
    • Cylinder 1-8 Ckt. Open Test Status
    • Cylinder 1-8 Ckt. Short to Volts Test Status
    • Each parameter should display OK.
  4. Engine running, observe the Misfire Current counters with a scan tool.
    • The counters should not be incrementing.
  5. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals