LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 (Engine Controls And Fuel - 6.6L - DTC P02E8 To DTC P1247) >> DTC P0640 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: You must perform the Circuit/System Verification before proceeding with Circuit/System Testing.
  1. Disconnect the IA heater
  2. Turn ON the ignition. Test the IA heater command 1 circuit terminal 2 for less than 12 volts.
    • If greater than 12 volts, test the command 1 circuit for a short to voltage. If the circuit tests normal, replace the glow plug control module.
  3. If the command 1 circuit tests normal, replace the IA heater.