Circuit/System Verification
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, engine OFF, clear the DTCs.
- Observe the scan tool EGR cooler temperature Sensor 2 parameter. The reading should be within the normal range -32 to +899°C (-25.6 to +1650°F), depending on the current ambient temperature and the vehicle operating conditions.
- Engine running, observe the DTC information with a scan tool. DTCs P041C or P041D should not be set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.