Circuit/System Verification
WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that P0721, P0722, P0723, P0966, P0967, P0969, P0970, P0971, P0973, P0974, P0976, P0977, P2720, P2721, P2728, P2729, or P2730 is not set.
- If any of the DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Perform the Transmission Fluid Check .
- Perform the Line Pressure Check .
- Perform the Control Solenoid Valve and Transmission Control Module Assembly Inspection .
- Perform the Control Solenoid Valve and Transmission Control Module Assembly Solenoid Performance Test
.
- If the shift solenoid 2 is found to be leaking or stuck OFF, replace the control solenoid valve assembly.
- If the control solenoid valve assembly tests normal, inspect the valve body and hydraulic circuits for a leak or a stuck valve.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.