Circuit/System Verification
WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the DTC sets outside of the Conditions for Running and Setting. Since most occurrences of this DTC are caused by Engine Overheating
, review with the customer the conditions under which the DTC set.
- If the DTC set within the Conditions for Running and Setting, the transmission is operating as designed.
- Perform the Transmission Fluid Check procedure.
- Operate the vehicle within the conditions that the customer experienced and verify the DTC does not reset.
- If the DTC resets, test for an overheating condition.