LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1366 (Engine Controls And Fuel - 4.8L, 5.3L, 6.0L, 6.2L - DTC P0010 To DTC P0230) >> DTC P0010 >> Component Testing >> Static Test

Static Test

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, remove the Camshaft Position Actuator Magnet.
  2. Test for 5.0-9.0 Ω between the solenoid control terminal 2 and the low reference terminal 1 at the Camshaft Position Actuator Magnet.
    • If not within the specified range, replace the Camshaft Position Actuator Magnet.
  3. Test for infinite resistance between each terminal of the magnet and the magnet housing.
    • If not the specified value, replace the Camshaft Position Actuator Magnet.
scientia non olet · About LEMON Manuals