Circuit/System Testing
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X5 harness connector at the BCM.
- Test for greater than infinite resistance between the BCM ignition circuit terminal 13 and ground.
- If less than specified, test for a short to ground.
- If the circuit tests normal, test or replace the BCM.