LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Automatic Transmission Fluid Pressure Test Hole Plug Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Pressure Tap Plug & O-Ring
    GM1914737Courtesy of GENERAL MOTORS CORP.
  1. Install a new O-ring (1) on the pressure tap plug (2).
    2. NOTE: Refer to FASTENER CAUTION .
  2. Install the plug and O-ring into the converter housing.

    Tighten:  Tighten the plug to 12 N.m (108 lb in).

scientia non olet · About LEMON Manuals