Output Speed Sensor Removal (2WD)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Output Speed Sensor, Vehicle Speed Sensor Bolt & O-Ring (2WD)

Courtesy of GENERAL MOTORS CORP.

Remove the vehicle speed sensor bolt (1) that retains the output speed sensor (2) to the low and reverse clutch housing - 2WD.
Remove the output speed sensor (2).
Remove the vehicle speed sensor O-ring (3) from the output speed sensor.